192.168.0.1 login
192.168.0.1 is the default IP address used by routers and modems for accessing the login management interface, also known as the default gateway. It allows users to manage basic configurations and advanced settings. Typically, D-link and Tenda devices have a default gateway address (also known as the management interface IP address) set to 192.168.0.1. Earlier WAVLINK devices also used 192.168.0.1 as the default gateway address. However, to prevent conflicts, later models switched to using 192.168.10.1 as the default gateway address.
You can try clicking here to access your router or modem management interface at 192.168.0.1.
How to log in to 192.168.0.1?
If the default IP address of your internet router/modem is 192.168.0.1, you can easily use it to log in to the configuration panel and manage the internet settings of your router/modem. To log in to 192.168.0.1, follow these steps:
- Ensure your device is connected to the network either through an Ethernet cable or wireless connection.
- Now, open a web browser that you use to access the internet.
- In the address bar, enter http://192.168.0.1 or simply 192.168.0.1.
- The login page for your router/modem will appear.
- Enter the default username and password for the router configuration page.
- After entering the login credentials, you will be logged into the configuration page and be able to make the necessary changes.
Forgot the IP address, username, and password?
- At this point, you can check the label on the back of your device to see if it contains the login IP address, username, and password information.
- Consult the manual: Usually, this option may not be applicable as you may have discarded the packaging along with the manual after purchasing the router. However, if you still have it, it can be very helpful as it provides detailed setup instructions.
- If none of the above options are available, we apologize for the inconvenience. However, you can still refer to our list of default usernames and passwords for routers. It contains the default login IP addresses and passwords for most brands.
Resetting the router
If you have changed the default username/password but forgot them, the best way to regain access is by resetting the router to its default settings. This will revert all changes back to the default configurations. To reset your router:
- Grab a sharp object like a pin or paperclip.
- Look for the reset button on the back of the router.
- You will find a hidden small button. Using the sharp object, press and hold the button for about 10-15 seconds.
- This will restore all modifications made back to their default settings, including any changed username/password. Afterwards, you will be able to log in using the default credentials.
